职位描述：

Key Job Responsibilities
Lead the engineering team responsible for NPI transfer with CN counterparts, mass production engineering support, machine maintenance, repair, and optimization of factory machinery and equipment.
Lead the engineering team for NPI project transfer in VN, review the readiness for all engineering documents, process, fixture, equipment and work with CN counterpart to make sure smooth transfer.
Create/Update BOM/Process Flow under CN template and guidance.
Lead the component/part development with VN local vendor and work with quality team for PPAP.
Mass production maintenance, issue troubleshooting, FACA and continuous improvement.
Develop and implement strategies for improving factory processes, reducing downtime, and optimizing production efficiency.
Oversee the design, implementation, and commissioning of new equipment or factory upgrades, ensuring projects are completed on time and within budget.
Maintenance & Equipment Reliability:
Establish and manage a preventive maintenance program to minimize equipment breakdowns and ensure high equipment reliability.
Monitor equipment performance and recommend modifications or upgrades to improve efficiency, reduce waste, and extend the lifespan of machinery.
Collaborate with production and quality teams to ensure equipment and processes meet product specifications and quality standards.
Process Improvement:
Implement Lean Manufacturing and Six Sigma methodologies to drive continuous improvement in factory processes.
Identify bottlenecks and inefficiencies in production and propose solutions to enhance throughput and reduce waste.
Analyze production data and KPIs to track performance and implement corrective actions as needed.
Team Leadership & Development:
Lead, mentor, and develop the engineering team, fostering a culture of collaboration, innovation, and excellence.
Set clear goals, conduct performance reviews, and identify training and development opportunities for engineers and technicians.
Ensure cross-functional communication and teamwork between engineering, production, and quality departments.
Budget Management:
Develop and manage the engineering department’s budget, ensuring cost-effective solutions without compromising quality.
Monitor expenses related to maintenance, spare parts, and capital projects, seeking opportunities for cost savings.

Qualifications
 Education:
Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a related field.
Master’s degree in Engineering or Business Administration is a plus.
Certifications in Lean Manufacturing, Six Sigma, or Project Management (e.g., PMP) are preferred.
Experience:
Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a related field.
Master’s degree in Engineering or Business Administration is a plus.
Certifications in Lean Manufacturing, Six Sigma, or Project Management (e.g., PMP) are preferred.
Experience:
At least 7-10 years of engineering experience in a manufacturing environment, with a minimum of 3-5 years in a managerial role.
Proven experience in managing maintenance, process optimization, and equipment reliability in a factory setting.
Experience in the manufacturing sector in Vietnam or Southeast Asia is an advantage.
Skills:
Strong technical knowledge of factory equipment, automation, and manufacturing processes.
Proficiency in engineering software (e.g., AutoCAD, SolidWorks) and maintenance management systems (CMMS).
Excellent problem-solving and troubleshooting skills.
Strong leadership and team management capabilities.
Effective communication skills in both Chinese and English. Vietnamese is better.
（该岗位会先在东莞培训，然后出差越南）

职位描述：

Key Job Responsibilities
Engineering Management:
Lead the engineering team responsible for the maintenance, repair, and optimization of factory machinery and equipment.
Develop and implement strategies for improving factory processes, reducing downtime, and optimizing production efficiency.
Oversee the design, implementation, and commissioning of new equipment or factory upgrades, ensuring projects are completed on time and within budget.
Maintenance & Equipment Reliability:
Establish and manage a preventive maintenance program to minimize equipment breakdowns and ensure high equipment reliability.
Monitor equipment performance and recommend modifications or upgrades to improve efficiency, reduce waste, and extend the lifespan of machinery.
Collaborate with production and quality teams to ensure equipment and processes meet product specifications and quality standards.
Process Improvement:
Implement Lean Manufacturing and Six Sigma methodologies to drive continuous improvement in factory processes.
Identify bottlenecks and inefficiencies in production and propose solutions to enhance throughput and reduce waste.
Analyze production data and KPIs to track performance and implement corrective actions as needed.
Team Leadership & Development:
Lead, mentor, and develop the engineering team, fostering a culture of collaboration, innovation, and excellence.
Set clear goals, conduct performance reviews, and identify training and development opportunities for engineers and technicians.
Ensure cross-functional communication and teamwork between engineering, production, and quality departments.
Budget Management:
Develop and manage the engineering department’s budget, ensuring cost-effective solutions without compromising quality.
Monitor expenses related to maintenance, spare parts, and capital projects, seeking opportunities for cost savings.

Qualifications
 Education:
Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a related field.
Master’s degree in Engineering or Business Administration is a plus.
Certifications in Lean Manufacturing, Six Sigma, or Project Management (e.g., PMP) are preferred.
Experience:
At least 7-10 years of engineering experience in a manufacturing environment, with a minimum of 3-5 years in a managerial role.
Proven experience in managing maintenance, process optimization, and equipment reliability in a factory setting.
Experience in the manufacturing sector in Vietnam or Southeast Asia is an advantage.
Skills:
Strong technical knowledge of factory equipment, automation, and manufacturing processes.
Proficiency in engineering software (e.g., AutoCAD, SolidWorks) and maintenance management systems (CMMS).
Excellent problem-solving and troubleshooting skills.
Strong leadership and team management capabilities.
Effective communication skills in both Chinese and English. Vietnamese is better.
（该岗位会先在东莞培训，然后出差越南）

职位描述：

Key Job Responsibilities
Project Management:
Lead and manage factory operations projects, including production line upgrades, process improvement initiatives, and new product introductions.
Define project scope, goals, timelines, and deliverables in collaboration with key stakeholders.
Develop detailed project plans, timelines, and resource allocation to ensure project milestones are met.
Monitor and control project budgets, ensuring cost-effective solutions without compromising quality.
Cross-functional Collaboration:
Work closely with production, engineering, quality control, and supply chain teams to ensure smooth project execution.
Coordinate with suppliers, contractors, and vendors for procurement of equipment, raw materials, and other project-related resources.
Communicate regularly with senior management and stakeholders to provide updates on project progress and resolve issues as they arise.
Process Optimization:
Identify areas for operational efficiency improvements within the factory, including equipment utilization, workflow optimization, and waste reduction.
Lead Lean and Six Sigma initiatives to drive continuous improvement and cost-saving projects.
Implement best practices for factory management, ensuring a balance between high-quality output and efficient use of resources.
Risk Management:
Identify potential risks associated with projects and develop mitigation plans.
Ensure compliance with Vietnamese safety and environmental regulations, as well as international standards (e.g., ISO).
Monitor and evaluate the impact of external factors (e.g., supply chain disruptions, regulatory changes) on project outcomes.
Team Leadership:
Lead and motivate project teams, providing guidance and support to ensure the successful completion of projects.
Assign tasks and responsibilities to team members, ensuring clear communication of objectives and timelines.
Conduct performance reviews and provide training to team members to enhance their skills and project management knowledge.
Reporting & Documentation:
Prepare regular project reports, including progress updates, budget tracking, and performance metrics, for senior management.
Maintain detailed project documentation, including project plans, timelines, and post-project evaluations.
Ensure proper documentation for audits and regulatory compliance.

Qualifications：
Education:
Bachelor’s degree in Engineering, Industrial Management, Operations Management, or a related field.
Project management certification (e.g., PMP, PRINCE2) is an advantage.
Experience:
Minimum of 5-7 years of experience in factory operations, manufacturing, or industrial project management.
Proven experience managing large-scale projects in a manufacturing environment, preferably in Vietnam or Southeast Asia.
Strong understanding of production processes, supply chain management, and Lean manufacturing principles.
Skills:
Excellent project management skills, with the ability to manage multiple projects simultaneously.
Strong analytical and problem-solving skills.
Proficiency in project management software and tools (e.g., MS Project, Gantt charts, ERP systems).
Effective communication and leadership skills, with the ability to work across departments and with external partners.
Fluent in Chinese and English, both written and spoken. Vietnamese is better.
（该岗位会先在东莞培训，然后出差越南）

职位描述：

Key Job Responsibilities:
Quality Control & Assurance:
1.Implement and maintain Quality Management Systems (QMS) in compliance with ISO 9001, ISO 14001, and other relevant standards.
2.Ensure all products meet internal and external quality specifications.
3.Oversee product testing, inspections, and certifications to ensure compliance with customer requirements.
4.Manage non-conformance reports (NCRs) and corrective/preventive actions (CAPA).
Process Improvement:
5.Lead continuous improvement initiatives aimed at reducing defects, rework, and product recalls.
6.Collaborate with production, engineering, and supply chain teams to optimize quality control processes.
7.Conduct root cause analysis for quality issues and drive effective solutions.
Supplier & Customer Relations:
8.Manage the quality of raw materials and components from local and international suppliers.
9.Handle customer feedback and complaints and ensure timely implementation of corrective actions.
10.Conduct supplier audits and collaborate with vendors to meet quality and delivery requirements.
Team Leadership & Development:
11.Lead and develop the quality assurance team in the factory.
12.Conduct training sessions to raise awareness and understanding of quality processes among staff.
13.Perform regular performance evaluations and provide development plans for team members.
Regulatory Compliance:
14.Ensure that all products meet Vietnamese regulatory requirements and relevant international standards (e.g., CE, RoHS, REACH).
15.Maintain up-to-date documentation and records for audits by local authorities and international customers.
16.Lead the factory in preparations for external quality and safety audits.
Reporting & Documentation:
17.Generate reports on key quality metrics such as defect rates, rework levels, and customer satisfaction.
18.Document all quality control activities, including test results, audits, and corrective actions.

Qualifications
Education:
1.Bachelor’s degree in engineering, Quality Management, Industrial Engineering, or a related field.
2.Certification in quality management (e.g., Certified Quality Manager, Six Sigma, Lean Manufacturing) is preferred.
Experience:
3.At least 5-7 years of quality management experience in a manufacturing environment, with 3+ years in a leadership role.
4.Experience in the manufacturing sector in Vietnam or Southeast Asia preferred.
5.Knowledge of international quality standards (ISO, Six Sigma, Lean Manufacturing) and Vietnamese regulations.
Skills:
6.Strong leadership and team management skills.
7.Proficiency in quality management tools such as FMEA, SPC, and root cause analysis.
8.Excellent problem-solving and analytical skills.
9.Strong communication skills in both Chinese and English, Vietnamese is better.
10.Experience with ERP and quality management software.
（该岗位会现在东莞培训，然后出差越南）

职位描述：

岗位职责：
1、负责自动化设备上位机软件开发，包括运动控制，工业机器人，GUI、工艺流程等。 
2、参与系统需求分析，方案设计，代码编写以及现场调试等相关工作。 
3、分析和解决软件开发中遇到的问题。 
4、编写开发过程文档及软件使用文档。

任职要求：
1、大专及以上学历，自动化相关专业 。 
2、3年以上自动化设备软件开发经验。 
3、熟练掌握C#编程语言，熟悉多线程编程，串口以及网络通讯。 
4、熟练运用凌华，固高，或者雷赛运动控制卡/控制器。了解机器视觉相关背景。

职位描述：

软件工程师  
1．	负责蓝牙耳机产品软件编写及开发;
2．	根据客户功能要求编写软件，实现客户所需要的功能要求；
3．	配合硬件工程师正确定义蓝牙芯片各 I / O 口功能；
4．	对耳机 UI 功能, 特别是定制化的需求进行技术可行性评估； 
5．	对接上游芯片原厂及芯片代理的 SW技术窗口； 
6．	针对新技术／新平台进行技术预研。 

岗位要求：
1、	大专或以上学历，电子／计算机相关专业；
2、	5年以上蓝牙音频相关产品软件开发经验，能独立完成蓝牙软件编程调试，熟悉蓝牙底层协议；
3、	独立完成过BES、络达、蓝讯、杰理等蓝牙方案开发经验，有ANC耳机开发经验的优先；
4、	掌握I2C, SPI , UART 等外围设备接口通讯；
5、	具备良好的沟通表达能力，善于技术表达和团队协作。 

职位描述：

岗位需求：
 1：负责海思3519DV500应用软件开发，MPP开发
 2：负责系统开发，熟悉内核原理，了解ISP，能够按照项目需求完成开发调试与维护。
 3：GUI开发调试
 4：能接受出差安排，有独立分析处理问题的能力，有良好的团队合作精神
任职要求：
1：熟悉海思SDK，了解Linux系统，有相关产品开发经验，
2：至少熟悉一种GUI开发工具，能独立完成相关项目开发需求
3： 熟练掌握，C语言，C++,MakeFile，shell脚本，有良好的编程习惯，模块设计和文档编纂能力
 4：熟悉使用UART,I2C,SPI,CAN总线等接口和规范，有汽车CAN/LIN/以太网或者海思，安霸平台开发经验者优先 ，
任职条件
 1：大专及以上学历，三年以上linux产品开发经验。
  2：具备一定的职业素养，逻辑思维和学习能力强，积极主动，认真负责，能抗压，善于沟通协作。

职位描述：

主要岗位职责：
1.Work with PM, PDM, tooling/fixture engineer, ME, EE from engineering side for new soft goods PD programs through the whole development phase and NPI phase.
2.Understand and meet client expectations and deliverables. Work with PDM/client to get the PRD requirement fully translated into clear and unambiguous requirements.
3.Be responsible for development from ID or concept. Provide 2D/BOM and process flow with support from ME/Fixture engineer. 
4.Be responsible for NPI transition from design ready to MP ramp up and take a  lead on manufacturing process solution. Provide DFM, FMEA, DOE, BOM, SOP, FC per customer requirement.
5.Be responsible for timely issue root cause analysis and resolution. 
6.Production capacity assurance and continuous improvement and technical issue troubleshoot.
7.Driving innovations on product designs and production techniques, incl. material, constructions and production process, etc.

岗位要求：
1.Bachelor degree in mechanical, textile or similar. 
机械工程、纺织工程等专业大学本科
2.Familiar with PU, leather, textile features and specifications
熟悉PU、皮革、纺织材料特性和规格
3. Experiences in soft CE accessories development and production introduction. Familiar with soft accessories production process heavily incorporated with machines/tools/fixtures/jigs for higher precision/accuracy control.
7年以上消费电子软附属产品开发和生产导入经验。熟悉电子配件生产流程工艺，熟悉精度要求高的机器、模治具的应用和开发。
4.Expert in using engineering software, like Autocad, Pro-e, etc.
精通工程软件，如Autocad，Pro-e等
5.Good at problem solving techniques, like DFM, FMEA, Cpk study and other statistics analysis tool.
熟悉问题分析和处理工具，如FMEA, Cpk分析及其他统计分析工具
6.Good English reading and writing
英文读写流利
7.Good team player and have good interpersonal communication skill.
人际沟通能力强，善于团队合作

职位描述：

Job responsibility岗位职责:
1. Follow up important project from inital quotation to mass-production.
2. Assist operation director to manager Rｕ００２６D department.
3. Other works assigned by operation director.
Key requirement任职要求:
1. Bachelor degree or above in mechanical or related major.
2. 6 or above product development or project management experience （connector product is priority）.
3. Being capable of design product with 3D and 2D software skillfully.
4. Fluent English in written and oral . 
5. Know well on ISO9001 and IATF16949.

职位描述：

【研发总监助理】
Job responsibility:
1. Follow up important project from inital quotation to mass-production.
2. Assist operation director to manager R&D department.
3. Other works assigned by operation director.

Key requirement:
1. Bachelor degree or above in mechanical or related major.
2. 6 or above product development or project management experience (connector product is priority).
3. Being capable of design product with 3D and 2D software skillfully.
4. Fluent English in written and oral (CET-4 Min). 
5. Know well on ISO9001 and IATF16949.

此为技术管理职位，以上为最低要求，低于此要求请勿投

职位描述：

任职资格：
1、电子类专业学校毕业，
2、从事5年以上蓝牙音频电子设计开发工作，能够独立完成专案项目
3、熟悉Haman、JVC、Anker等品牌Tws、头戴式、运动款面条耳机设计方案及技术规格标准
4、熟练使用PCB设计相关软件，如：Protel、Altium Designer，Mentior Pads及CAD等相关软件
5、熟悉常用蓝牙耳机方案平台，如：洛达、高通、瑞昱、杰理、蓝讯、恒铉、物奇等方案
6、熟练使用各种开发仪器，如：网络分析仪、蓝牙测试仪、电声测试仪、频谱分析仪等
7、熟悉蓝牙耳机RF设计注意事项和各类认证需要

工作内容：
1、负责产品的PCB设计、原理图设计以及外包项目的跟进
2、负责产品的各类资料输出，如：BOM、贴片装配图、UI操作、规格书等
3、负责产品电子器件测试与承认
4、负责产品RF距离和各类电气性能报告输出
5、负责产品前期试产ES、EP、PP物料追踪和试产跟进

职位描述：

岗位职责：
1、负责对自动化设备整体的电气设计及编程开发；
2、对已有的自动化设备升级改造满足实际需求；
3、撰写负责设计开发的技术文件、电气图纸及PLC编程，并参与设计调试；
4、承担新技术的预研和开发工作，并生成相关的专利文件；
5、与外协单位技术洽谈等相关事宜，参与管理活动，撰写相关的管理文件；
6、出差美国处理电气及机器人的编程的售后工作。
任职要求：
1、熟悉电气设计及实施，熟悉电气布线，电气部件选型，熟练掌握CAD或EPLAN绘图软件，了解库卡、发那科机器人；
2、熟悉步进或伺服电机选型，精通步进，伺服，直线电机的运动控制；
3、精通三菱FX5系列，或者掌握基恩士及西门子等PLC编程，熟悉威纶通或等同品牌，了解美国ANSI/UI及电气标准；
4、丰富的设备故障报警处理经验，动手能力强，快速处理调试问题；
5、有较强的责任心，良好的团队协助能力，沟通能力，谦虚踏实，性格开朗稳住，善于学习和思考，工作认真负责，具备一定的技术管理能力，效率较高；
6、大专及本科以上的学历，5-10年工作经验，英语可作为工作语言，有美签。

职位描述：

主要岗位职责：
1.Responsible for MES network configuration, Pre-launch research, project development and implementation.
负责MES系统的网络规划和部署；系统上线前调研；配合产品开发及系统实施直至验收
2.Resposible for MES&ERP SOP set up, function training and daily management.
负责MES系统及ERP系统手册编写、功能培训及日常管理维护
3. Design, create and manage ERP/MES business processes according to business requirements
根据业务需求进行相应的ERP/MES业务流程设计、创建和管理
4. Proficient in system operation and maintenance such as anti-leak, IP control, AD domain control, Email, OA, ERP, antivirus, and SymantecBE backup  
精通防泄密、IP管控、AD域控、Email、OA、ERP、防病毒、SymantecBE备份等系统运维
5 . Proficient in enterprise network planning and deployment and network device management of routers, switches, firewalls and online behavior
精通企业网络规划部署和主流品牌路由器、交换机、防火墙、上网行为等网络设备管理
6. Proficient in batch deployment of cloud server and MDT desktop system  
精通云服务器和MDT桌面系统批量部署
7. Responsible for daily network and office IT equipment maintenance, network structure adjustment and optimization  
负责公司日常网络及办公IT设备维护，进行网络架构调整及优化

主要岗位要求：
1. College degree or above, major in computer science  
大专以上学历，计算机相关专业
2. At least 5 years working experience in the same position, familiar with NetSuite system development and maintenance is preferred  
具有5年以上同岗位工作经验，熟悉NetSuite系统开发及维护优先
3. Familiar with TCP/IP, OSPF, VLAN, VPN, ACL, IPSG, NAT, AND PBR protocols and technologies  
熟悉TCP/IP、OSPF、VLAN、VPN、ACL、IPSG、NAT、PBR等协议/技术
4. Familiar with API development experience in developing APIS and calling third party APIS 
熟悉API接口开发有开发API的能力以及调用第三方API的经验
5. Good English listening, speaking, reading and writing skills, fluent oral English is preferred. 
良好的英文听说读写能力，英语口语流利优先。
6. Good health. Good at communication, proactive and team work spirit, able to propose intelligent and rational solutions to different problems  
身体健康。善于沟通 , 积极主动有团队合作精神，能够针对不同问题提出睿智、理性的解决方案

职位描述：

工作职责：
1.主导项目技术问题对内、外技术窗口并统筹项目技术问题及专案工程文件审核、ECN管理
2.NPI BOM/flow chart建立维护
3.项目前期评估:工艺，模具，治具，检具
4.客户图面review/反馈/转换
5.客户图纸公差检讨
6.内部图面的审核发行
7. CNC/模具首件确认（含结构和尺寸）
8.客户ECN的评估执行
9.推动build良率提升及重大问题解决，整理lesson learn
10. Second source承认及导入
11.客户问题投诉解决

任职条件：
专业:机械或模具专业
工作经验需求：具备丰富3C行业经验
技能要求：熟练掌握Excel/Word等办公软件
其它要求：团队精神和沟通协调能力佳，有较强的数据分析能力跟异常问题快速改善能力，做事认真仔细，工作推动积极

职位描述：

任职要求：
1.University graduate in Electronic engineering or equivalent;
2.At least 5 years of experience on new product development process is essential;
3.Electronic engineering in EMS/Program management experience is preferred;
4.Self -motivated in leading and working with cross functional team;
5.Good in communication skills is essential;
6.Good in speaking/writing/listening of English is a must.

职位描述：

Key Job Responsibilities
1.Manage the Vendor relationship and oversight vendor related activities, reports to managements on outstanding issues.
2.Manage all supplier contracts ensuring full contract coverage at all times. Contract authoring/adaptation for business awards and utilization of e-storage of contracts in e-procurement portal.            
3.Support the team head in team strategy and enhance the core value policy.
4.Work closely with internal teams to ensure supplier has complied with requirements, capacity and capabilities, quality, compliance procedure and standard.            
5.Manage vendor base to assure products can be delivered with optimum cost, quality and service.
6.Establish tools to improve vendor performance.

Job Qualifications：
1.5+ years of sourcing/vendor management/procurement, materials management -  -Excellent technical skills including Excel, Access Project Management 
2.Commercial Negotiation skills 
3.Engineering background Preferred 
4.Manufacturing experience 
5.Forecast planning proficiency 
6.Supply chain experience 
7.Strong project management skills 
8.Effective communication skills (written and oral) 
9.Strong interpersonal skills 
10.Strong presentation skills 
11.Analytical thinker 
12.Business Acumen 
 13.Dealing with ambiguity

职位描述：

Key areas of accountability:
•	Lead a quality engineer team to manage new product quality at product whole life cycle from RFQ to EOL to ensure produce smoothly and satisfy with customer requirement.
•	Lead a quality engineer team to be act as customer interface for quality contract and requirement negotiation and transfer within project team.
•	Lead a quality engineer team to be responsible for new product release quality planning and monitor the performance
•	Lead a quality engineer team to manage Sub contractor on setting quality / test standard to ensure the quality fully meet customer requirement.
•	Lead a quality engineer team to work with other departments to drive process and product quality improvement
•	Lead a quality engineer team to drive the quality improvement in trial run and mass production phase, accurate feedback to project teams on CSR for Quality control plan, product validation.
•	Lead a quality engineer team to execute internal Failure Analysis for quality issue and follow up the effectiveness of FAR and 8D
•	Lead a quality engineer team to handle customer complaint (8D) and warranty returns, drive corrective and preventive actions
•	Team management/building/development, morale inspiring, contribute to team talent retention

Job scope:
Work under minimum supervising and most tasks can be finished independently with relevant knowledge.  Works require initiation and cases can be different.  Interaction with both internal and external parties and communication will reach levels from junior employee to senior management.  Work requires independent decision making and the decision would directly influence the quality result.

Qualification:
•	Academic / Professional Qualification: University Degree in Electronics / Mechanical /Acoustic
•	Working Experience: Min 6 years’ experience, preferably in AV product box at build level. Acoustic experience is an advantage. 
•	Expertise / Skills: Familiar with ISO9000, IATF16949 or VDA6.3 requirements. Good in quality tools like APQP/SPC/MSA/FMEA/PPAP and 8D, good analytical skill (statistical skill) and process audit skill. 
•	Understand and able to fulfil the customer requirements and customer special requirement.
•	Language skills: fluent English (written & spoken)
•	Personal Attributes: Aggressive, assertive, good in follow up, able to work independently under pressure, detail and hardworking, good leadership.

职位描述：

岗位职责：
职责一：参与新功能，新技术可行性评估
1.TWS耳机、音箱等方案关键功能可行性评估；
2.方案主芯片资源可行性（Flash、RAM、MIPS等）评估；
3.SDK成熟度评估；
4.UI可行性评估；

职责二：独立完成软件开发/跟进任务
1.UI定义的相关功能模块；
2.跟进解决项目各个阶段的问题，包括软件UI逻辑、硬件功能、声学调试、产线测试等；

任职要求：
1.本科以上学历，有至少3年耳机、音频、智能穿戴等行业经验；
2.熟悉主流芯片（例：高通、BES、杰理、物骐等）的开发；
3.精通蓝牙通用功能实现的逻辑，熟悉SIG Bluetooth相关profile；
4.熟悉git、source tree等相关软件版本管理工具；
5.熟悉电路常见分析调试方案，熟练阅读原理图，了解产线生产工艺流程；
6.熟悉Ellisys Bluetooth协议分析测试仪使用；
7.熟悉 新项目从立项到量产ui功能导入及实现，项目产测阶段跨部门沟通处理与结果，项目试产阶段现场问题分析定位的能力。

职位描述：

JOB SCOPE/SUMMARY:
Assist on daily works in laboratory. Arrange reliability testing per plan required. Analyse
testing data and send report to customer.
协助实验室的日常工作。根据计划要求安排可靠性测试。分析测试数据并将报告发送给客户。
Provides for lab-related customer service, troubleshooting and problem solving as directed by Supervisor.
按照主管的指示，提供与实验室有关的客户服务、故障排除和问题解决。

RESPONSIBILITIES:
1. Ensures all lab staffs have adequate resources, training and safety condition to perform
all aspects of work required.
（确保所有实验室工作人员有足够的资源、培训和安全条件来完成所需的各方面工作。）
2. Ensures all daily technical and test reports are competency recorded and maintained
（确保所有的日常技术和测试报告都有能力记录和维护）
3.Ensures all test plan can be completed within timeline.
（确保所有的测试计划能在规定时间内完成。）
4.Assists Lab Supervisor to prepare training material, test standards, and equipment maintenance documents.
（协助实验室主管准备培训材料、测试标准和设备维护文件。）
5.Maintains all Lab equipment, fixtures and tooling in good conditions for daily operation.
（维护所有的实验室设备、夹具和工具在良好的条件下进行日常操作。）
6.Assists in-house equipment's calibration internally and outsourcing 3rd-part lab calibration.
（协助内部设备的内部校准和外包的第三方实验室校准。）
7. Assists to build testing plan performing for new product development stage.
（协助制定新产品研发阶段的测试计划。）
8. Assists to prepare SOP for testing equipment operating, and SIP for operators to follow.
（协助制定测试设备操作的SOP，以及操作人员需要遵守的SIP。）
9、Assists to demon and appliance test standards to operators to follow.
（协助制定测试标准，供操作人员遵循。）
10. Assists to translate client's testing manual into local language (Chinese) for operators to follow.
（协助将客户的测试手册翻译成当地语言（中文），供操作人员遵循。）
11. To follow-up and update testing requirements/standards according to new international/specify countries' regulations to operators,
（根据新的国际/特定国家的法规，跟进并更新测试要求/标准给操作人员。）
12. Monitors the test lab daily operations, review test reports and oversee products conformity.
（监督测试实验室的日常运作，审查测试报告并监督产品的符合性。）
13. Support Proto, EVT, DVT, PVT, RAMP developing phases reliability test and ORT (On-going Reliability Test) processing and reporting to client timely.
（支持Proto, EVT, DVT, PVT, RAMP开发阶段的可靠性测试和ORT（On-going Reliability Test）的处理，并及时向客户报告。）

QUALIFICATIONS :
1.	At least  5 years of reliability testing, the one has Apple product reliability testing is preferred.
（至少5年以上可靠性测试工作，有苹果产品可靠性测试者优先。）
2.	Experience with Apple product durability testing standards and methods, reliability phenomena, failure symptom. Well know the common cosmetic judgment, function performance , and the failure analysis methods.
（对苹果产品的耐久性测试标准和方法、可靠性现象、故障症状有一定经验。熟悉常见的外观判断、功能性能、故障分析方法。）
3.	Familiar with basic reliability tests such as temperature and humidity, UV, salt spray vibration drop etc. Ability of failure analysis tests such as cross section, photo analysis by optical microscope.
（熟悉基本的可靠性测试，如温湿度、紫外线、盐雾振动跌落等，具备故障分析测试能力，如横截面、光学显微镜照片分析。）
4.	Be able to operate the common equipment in lab and familiar with the basic maintenance
（能够操作实验室的常用设备，熟悉基本的维护。）
5.Proficient communication in English
（熟练英文沟通）

职位描述：

Key Job Description:
1.	Serves as the primary quality focal point between Sigma and the textile/PU/webbing supplier manufacturing facility;
2.	Interface and execution of quality tools, methodologies and requirements are fully implemented and met;
3.	Provide leadership and work with functional team in resolving supplier quality issues;
4.	To lead and drive the supplier for continuous quality improvement processes ensuring the quality goals and expectations are met;
5.	Evaluate supplier’s performance and provide feedback to core team. Develop and administer improvement programs;
6.	Identification and mitigation of potential quality risks to Sigma cross function team to ensure continuity of supply;
7.	Provide leadership, development and implementation of effective SQE structure/program at supplier manufacturing facility to support Sigma expectations.

Qualification:
1.	College degree or above, excellent health, familiar with Office software.
2.	  3+ years supplier quality control working experience in textile products industry. Rich knowledge of quality controlling on knitted and woven fabric and accessories of textile products. Familiar with relevant nation/international testing and inspection standards. Learn the process of textile products. Be good at preparing CAPA. 
3.	Srong monunication sills, organization skill and Jobs Plan abilities.
4.	Good command of English in read and writing.

职位描述：

Responsibilities:
•	Good team leader for leading project development with major OEM/ODM customers; 
•	Project development tracking and follow up.
•	Independent handle oversea customer inquires, project related matters, and present development progress report.
•	Cross departments communication to follow up various project activities; departments include PMC, SOURCING, PRODUCTION, QA, MKT and ENG. 
•	Make sure the development schedule and unit cost DO NOT off track from the original plan; immediately report and provide suggestion if off track happen.
•	Take the lead on project development flow until mass production ready. 
Requirements:
•	Degree holder in Electronic/Mechanical Engineering or Project Management related disciplines
•	Graduated from overseas will be an advantages
•	Over 5 years’ experience in Project Management, product development and BOM costing experience. 
•	Strong knowledge on consumer electronic product development flow.
•	Logical mind on problem solving and good presentation.
•	Experience on consumer electronic product, such as LED lamp/healthcare/IOT/Pet care related product.
•	Skillful on project management software tool, PMP preferred.
•	Excellent English / Mandarin and communication skill both written and verbal.
 

职位描述：

Job Purpose: 
Responsible for production process technologies for new projects and mass production on time, coordinate with a diverse set of cross-site technical contributors, including internal teams, manufacturing factory and vendors to successfully transition the design into high volume manufacturing

Key areas of accountability:
 1、Responsible for the group process of new projects and mass production;
 2、Support RFQ/RFS on scrap/efficiency/investment;
 3、Responsible for the group project efficiency, scrap, quality on target;
 4、Support production for Sub-cons on productivity and technical aspects;
 5、Advice on improvement activities of production related to quality & engineering.
 6、Transfer technical know-how and trouble shooting skills from Development to manufacturing；
 7、Assist mass production team to strengthen their trouble shooting skills and process engineering capabilities；
 8、Assist plants set up their process management system for engineering department to ensure quality products are delivered to our customer；
 9、Work with Process Engineers and Sub-cons to define line lay-out, line balancing, time study, manpower planning.；
10、Guide and support the competency development of all Process Engineers;
11、Define continuous productivity improvement opportunities with Process Engineers and the action plan。

Job scope:
Work with people across at all levels of the organization and external parties, lead a process and quality team on daily operations.   Decisions are made with professional knowledge and have partly impacts to operations department.  Tasks can be different and require prompt and accurate judgment.

Qualification:
1、Academic / Professional Qualification:  Bachelor Engineering Degree in Mechanical / Industrial / Acoustical
2、Working Experience: 5 years’ experience in related industry, preferably in speaker industry
3、Expertise / Skills: Knowledge of problem solving tool like SE, DOE.  Able to use CAD to design jigs & fixture.
4、Language skills: Ability to converse in English
5、Personal Attributes: Team player, clear and concise in communication, following up on details

职位描述：

Global Sourcing Manager
Main responsibilities
1.Develop & Implement Sourcing Strategies: Collaborate with cross-functional teams to define and implement sourcing strategies that align with business objectives and drive cost savings.
2.Supplier Management & Negotiations: Conduct thorough supplier assessments, negotiate favorable terms and agreements, and maintain strong relationships with key suppliers. Work with suppliers and stakeholders to ensure delivery is on time &  ensure the quality will live up to the standards.
3.Global Market Analysis: Stay abreast of global market trends, commodity prices, and supplier capabilities to inform sourcing decisions.
4.Risk Management: Identify and mitigate supply chain risks, including geopolitical risks, supplier instability, and quality issues.
5.Cost Savings Initiatives: Lead initiatives to optimize spend and achieve cost savings targets through supplier negotiations, market benchmarking, and process improvements.
Required Qualifications
1.Strong project management skills with the ability to drive cross-functional teams towards common goals.
2.Analytical mindset with a data-driven approach to decision-making.In-depth understanding of global supply chain dynamics and market trends.
3.Bachelor’s degree holder or above, preferably in Business Administration, Supply Chain Management, or related field.
4.Minimum 10 years of experience in global sourcing, preferably in a multinational company, specialized for American retail supermarket chain
5.Excellent analytical and problem-solving skills, with a proven track record of achieving cost savings.
6.Strong negotiation skills and ability to build effective relationships with suppliers at all levels.
7.Work independently, self-motivated with positive attitude and mindset and willing to take challenge.
8.High adaptability and ability to work in cross functional capacity.Problem solving skills
9.Must Fluency in English, both written and spoken, with additional language skills a plus.
10.Proficient in Microsoft Office, ERP systems, spreadsheets, and other sourcing-related tools.

职位描述：

岗位职责：
1.电源线 电缆  插头线，线束加工设备的日常维护，维修，调试。
3.满足生产部门设备需求，配合生产部门完成生产任务。

任职要求：
1、电线插头行业三年以上工作经验，熟悉电源线插头和电线电缆设备维修	
2、有自动端子机和自动裁线机，特别是KOMAX端子机调试维修经验
3、具备良好的沟通能力，吃苦耐劳，主动积极，具备团队合作精神；
4、长住墨西哥，有墨西哥签证者优先（圣路易斯波托亚 San Luis Potosi）

职位描述：

1、负责软件产品的规划、设计和市场调研；
2、管理协调产品线内外部关系，合理分配内部资源；
3、基于用户体验设计理念，结合用户需求和产品技术架构，完成产品/功能的概念设计和原型展示；
4、在软件开发前，完成交付给开发和测试团队产品需求文档，功能定义，完成视觉设计，用户界面（UI），交互设计等详细设计文档；
5、协调技术开发人员，跟踪产品开发进度，完成产品的开发、测试、版本管理，评审发布，产品上线等相关工作；
6、协同研发团队监督确保产品开发的合理架构、优化方案、资源落实和项目进度；
7、跟踪产品的市场效果、用户反馈，收集和主动挖掘改进需求，根据业务需要持续改进产品，提升用户体验。
岗位要求：
1.计算机其相关专业大专以上学历、三年以上产品设计经验，熟悉PC端、移动端产品的设计和技术，独立负责过产品或功能的生命周期管理；
2.要有小程序开发和APP开发的全流程经验。
3.熟练使用Axure RP、xmind等原型设计工具，能快速完成原形设计；
4.有创意有激情，能够独立进行产品策划立项、设计，撰写产品需求文档；
5.良好的沟通协作能力，能在复杂条件下灵活调整、强力执行；
6.良好的文字及语言表达能力，逻辑思维能力；
7.有商业意识、对市场需求有很好的洞察力。

职位描述：

主要岗位职责：
1.Lead line transfer from SVN engineering side and working with CN engineering team to make sure all details are covered for transfer.
与CN工程团队合作，带领SVN工程方面的线路转移；
2.Lead Station qualification and line qualification.
负责站点和生产线的资质认证；
3.Receive and review CAD/BOM from CN and provide feedback.
接受和审核来自中国的CAD/BOM，并提供反馈意见；
4.Maintain and update process flow chart from CN when needed.
根据需要维护和更新来自中国的工艺流程图；
5.Maintain and update SOP when needed.
根据需要维护和更新标准操作程序（SOP）；
6.Local component/part development. 
本地组件/零件开发；
7.Verify and optimize process paratmeter by DOE
通过DOE验证和优化工艺参数；
8.FACA support for quality issues. 
在质量问题中提供FACA支持；
9.Yield improvement in NPI builds, ramp up and MP stage.
在新产品导入（NPI）阶段、量产阶段提高良品率；
10. Layout, OBD maintenance and line balance improvement.
布局、OBD维护和生产线平衡改进。
11. Fixture/Machine maintenance management
夹具/设备维护管理。
 
岗位要求：
1.Good health，College degree or above, major in Mechanical, Automation, Electronic or similar
身体健康，本科及以上学历，机械、自动化、电子或相关专业；
2.Knowledge of process capability study
具备工艺能力研究知识；
3.Familiar with laser machine, glue dispensing machine, Servo press. Knowledge of plastic injection is a plus.
熟悉激光机、点胶机、伺服压机。了解塑料注塑者优先考虑；
4.Familiar with hardware and consumer electronic products, softgoods experience is a plus
熟悉硬件和消费电子产品，软件经验者优先考虑；
5.Have IE knowledge.
具备工业工程知识；
6.English reading and writing, common English speaking will be ideal.
有英语读写能力，能够进行基本英语口语交流优先；
7.Clear mind with strong logic thinking
思维清晰，逻辑思维能力强；
8.Solve problem independently 
能够独立解决问题；
9.Capable of using one Engineering software, like CAD, Creo, UG.
能够熟练使用一种工程软件，如CAD、Creo、UG等。

注：该岗位需要先在东莞进行培训，然后出差越南

职位描述：

Key areas of accountability:
     1、Responsible for global project jig and fixture design.
     2、Identify key dimension in the drawing which is critical to quality and efficiency.
     3、Organize jig and fixture design review meeting before place order to supplier for fabrication.
     4、Support process engineer to verify the jig during trail run.
     5、Improve jig design for quality and efficiency after trail run.
     6、Update jig and fixture design rule according to lessons learn on each project.
     7、Design the jig and fixture with Poka yoke mindset.
     8、Transfer technical know-how and trouble shooting skills from Development to manufacturing on jigs.
     9、Assist mass production team to strengthen their jig design skills.
    10、Assist plants to set up their jig and fixture management system for engineering. department to ensure quality products are delivered to our customer.
    11、Jig and fixture innovation with low cost and high quality.
    12、Assist jig and fixture vender to produce jig on time and on quality.
    13、Use tolerance analysis technology for key process with complex jig.

Job scope:
Work with people across at all levels of the organization and external parties, support process and quality team on daily operations.   Decisions are made with professional knowledge and have partly impacts to operations department.  Tasks can be different and require prompt and accurate judgment.

Qualification:
     1、Academic / Professional Qualification:  Min Engineering Degree in Mechanical / Industrial / Acoustical.
     2、Working Experience: more than 5 years’ experience in related industry, preferably in speaker industry.
     3、Expertise / Skills: Knowledge of problem-solving tool like SE, DOE and tolerance analysis. Able to use ProE and CAD to design jigs & fixture.
     4、Language skills: Ability to converse in English.
     5、Personal Attributes: Team player, clear and concise in communication, following up in details.

职位描述：

岗位职责：
1、Improve the design concept of ID using 3D software and break it down into implementable structural components.
运用3D软件完善ID的设计概念，并拆分成可实施的结构零部件。
2、Summarize material information and plan sampling lead time.
汇总物料信息并计划样板交期。
3、Plan and organize the build out of machinery, tools and processes within the prototype lab.
充分利用手办房的机器、工具完成高质量手办及其工艺流程
4、Continuously updating product progress and reports.
持续更新产品进度及报告
5、Provide the project team with the required tech pack (BOM, process flow, mold and machine list, etc.) for quotation.
及时为项目组提供报价所需技术包（BOM, 工艺流程，模具及机器清单等）
6、Define and implement DOE to tackle technical issues on tooling/material/product construction/geometry & aesthetic/process parameter.
定义和实施DOE，用以解决工具/材料/产品结构/几何形状和美学/工艺参数方面的技术问题。
7、Meet customer’s requirements through clear communication and timely responding.
通过清晰的沟通和及时的回应，满足客户的要求。

岗位要求：
1、Minimum of 3 years’ experience with technical, engineering & manufacturing
3年以上的技术、工程和制造方面的经验
2、Experience in injection molding and hot press mold design is preferred.
有注塑模设计或热压成型设计方面经验更佳
3、Understand mechanical processing technology.
懂机械加工工艺
4、Proficient in using UG/Pro E or Solidworks for 3D modeling is required. (UP preferred) 
能熟练运用UG/Pro-E或Solidworks进行3D建模（UG优先）
5、Computer skills, keynote, PPT, excel.
计算机技能，keynote, PPT, excel。
6、Good English reading and writing;
良好的英语读、写能力。
7、Good presentation and communication skills;
具良好的协调及沟通技巧。

职位描述：

DUTIES & ESSENTIAL JOB FUNCTIONS
For NPI projects (new developed projects)
负责 NPI 项目（新开发项目）
2.to align with customer for quality requirements, including test plan, cosmetic standard, dimension spec, function, etc. And transfer customer requirements to internal operation. 
与客户的质量要求保持一致，包括测试计划、外观标准、尺寸规格、功能等。并将客户要求转达给内部操作人员。
3.to drive PPAP documents/NPI readiness collection, including Drawing, Flow Chart, FMEA, Control Plan, MIP, SOP, SIP, MIL, Yield report, etc. Based on these, evaluate if project can go to mass production in the standpoint of quality, and to escalate if there is any risk.
推动 PPAP 文件/NPI 准备收集，包括图纸、流程图、FMEA、控制计划、MIP、SOP、SIP、MIL、良率报告等。在此基础上，从质量角度评估项目是否可以投入量产，并在出现风险时上报。
4.To lead Yield rate improvement
引导良品率的提高

For Mass production projects
量产项目
4.to check the quality performance daily and master it’s within the KPIs.
每天检查质量绩效，并掌握其是否在 KPI 范围内。
5.to deal with any quality incidents on site, work with PD/ME for the cause analysis and corrective actions.
处理现场发生的任何质量事故，与 PD/ME 合作分析原因并采取纠正措施。
6.To lead scrap cost improvement
领导废料成本改进工作
7.to take continuous improvement actions to reduce scrap/reworking, and work with QC for process audit and drive improvement/correction.
采取持续改进措施，减少废品/返工，与品管部合作进行流程审核，推动改进/纠正。
8.to deal with customer claims and 8D report for problem analysis and solving.
处理客户索赔和 8D 报告，以分析和解决问题。

REQUIRED
1.At least 5 years quality working experience, new project experience is preferred;
至少 5 年质量工作经验，有新项目经验者优先；
2.Basic quality knowledge and skills/tools is a must, such like Control Plan, MSA, FMEA, SPC, GR&R, DOE, etc.
必须具备基本的质量知识和技能/工具，如控制计划、MSA、FMEA、SPC、GR&R、DOE 等。
3.Good English in reading/writing/listening/speaking;
良好的英语读/写/听/说能力；
4.Good report skills in PPT and 8D;
良好的 PPT 和 8D 报告技能
5.Good communication and negotiation skills with internal and external
良好的内外部沟通和谈判技巧

职位描述：

高级QE工程师

DUTIES & ESSENTIAL JOB FUNCTIONS
For NPI projects (new developed projects)
负责 NPI 项目（新开发项目）
2.to align with customer for quality requirements, including test plan, cosmetic standard, dimension spec, function, etc. And transfer customer requirements to internal operation. 
与客户的质量要求保持一致，包括测试计划、外观标准、尺寸规格、功能等。并将客户要求转达给内部操作人员。
3.to drive PPAP documents/NPI readiness collection, including Drawing, Flow Chart, FMEA, Control Plan, MIP, SOP, SIP, MIL, Yield report, etc. Based on these, evaluate if project can go to mass production in the standpoint of quality, and to escalate if there is any risk.
推动 PPAP 文件/NPI 准备收集，包括图纸、流程图、FMEA、控制计划、MIP、SOP、SIP、MIL、良率报告等。在此基础上，从质量角度评估项目是否可以投入量产，并在出现风险时上报。
4.To lead Yield rate improvement
引导良品率的提高

For Mass production projects
量产项目
4.to check the quality performance daily and master it’s within the KPIs.
每天检查质量绩效，并掌握其是否在 KPI 范围内。
5.to deal with any quality incidents on site, work with PD/ME for the cause analysis and corrective actions.
处理现场发生的任何质量事故，与 PD/ME 合作分析原因并采取纠正措施。
6.To lead scrap cost improvement
领导废料成本改进工作
7.to take continuous improvement actions to reduce scrap/reworking, and work with QC for process audit and drive improvement/correction.
采取持续改进措施，减少废品/返工，与品管部合作进行流程审核，推动改进/纠正。
8.to deal with customer claims and 8D report for problem analysis and solving.
处理客户索赔和 8D 报告，以分析和解决问题。

REQUIRED
1.At least 5 years quality working experience, new project experience is preferred;
至少 5 年质量工作经验，有新项目经验者优先；
2.Basic quality knowledge and skills/tools is a must, such like Control Plan, MSA, FMEA, SPC, GR&R, DOE, etc.
必须具备基本的质量知识和技能/工具，如控制计划、MSA、FMEA、SPC、GR&R、DOE 等。
3.Good English in reading/writing/listening/speaking;
良好的英语读/写/听/说能力；
4.Good report skills in PPT and 8D;
良好的 PPT 和 8D 报告技能
5.Good communication and negotiation skills with internal and external
良好的内外部沟通和谈判技巧